Tip Top Top Coat 13ml

Usage

1. Wash and disinfect yours and your customers' hands. Put on gloves. Assess the condition of the customer's hands and nails to make sure that there are no contraindications for the treatment.
2. Push the cuticles back using a cuticle pusher or a stick and treat them with e-file bit, e.g. 9, 1.
3. Thoroughly matt the nail plate with a 100/180 grit buffer.
4. Remove the excess nail dust with a soft brush.
5. Dehydrate the nail plate with a dust-free cotton swab and purple Cleaner.
6. Apply the appropriate primer (Acid Free Primer or Acid Primer).
7. Apply one layer of the selected gel polish base and cure in the lamp (adjust the curing time to the parameters of the lamp you use).
8. If the nails require a superstructure, choose any building base, e.g. Protein Base or Mineral Base and sculpt the nail. Remember to extend the curing time to 60 seconds in the MultiLed lamp.
9. Apply the selected colour, curing each layer of gel polish in the lamp.
10. Use Tip Top top coat to finish and enhance the durability of the design. Since this top coat leaves no dispersion, there is no need to wipe the nail with a shining cleaner.
11. Remember that the top cot must cool down after removing it from the lamp.